feat: Add a ton of hyprland config

.config/hypr/hypridle.conf

@@ -1,14 +1,34 @@
 general {
-    lock_cmd = notify-send "lock!"          # dbus/sysd lock command (loginctl lock-session)
+    lock_cmd = pidof hyprlock || hyprlock       # avoid starting multiple hyprlock instances.
-    unlock_cmd = notify-send "unlock!"      # same as above, but unlock
+    before_sleep_cmd = loginctl lock-session    # lock before suspend.
-    before_sleep_cmd = notify-send "Zzz"    # command ran before sleep
+    after_sleep_cmd = hyprctl dispatch dpms on  # to avoid having to press a key twice to turn on the display.
-    after_sleep_cmd = notify-send "Awake!"  # command ran after sleep
-    ignore_dbus_inhibit = false             # whether to ignore dbus-sent idle-inhibit requests (used by e.g. firefox or steam)
-    ignore_systemd_inhibit = false          # whether to ignore systemd-inhibit --what=idle inhibitors
 }
 
 listener {
-    timeout = 500                            # in seconds
+    timeout = 150                                # 2.5min.
-    on-timeout = notify-send "You are idle!" # command to run when timeout has passed
+    on-timeout = brightnessctl -s set 10         # set monitor backlight to minimum, avoid 0 on OLED monitor.
-    on-resume = notify-send "Welcome back!"  # command to run when activity is detected after timeout has fired.
+    on-resume = brightnessctl -r                 # monitor backlight restore.
+}
+
+# turn off keyboard backlight, comment out this section if you dont have a keyboard backlight.
+# listener { 
+#     timeout = 150                                          # 2.5min.
+#     on-timeout = brightnessctl -sd rgb:kbd_backlight set 0 # turn off keyboard backlight.
+#     on-resume = brightnessctl -rd rgb:kbd_backlight        # turn on keyboard backlight.
+# }
+
+listener {
+    timeout = 300                                 # 5min
+    on-timeout = loginctl lock-session            # lock screen when timeout has passed
+}
+
+listener {
+    timeout = 330                                                     # 5.5min
+    on-timeout = hyprctl dispatch dpms off                            # screen off when timeout has passed
+    on-resume = hyprctl dispatch dpms on && brightnessctl -r          # screen on when activity is detected after timeout has fired.
+}
+
+listener {
+    timeout = 1800                                # 30min
+    on-timeout = systemctl suspend                # suspend pc
 }

.config/hypr/hyprland.conf

@@ -25,7 +25,10 @@ env = HYPRSHOT_DIR,/home/$USER/Pictures/Screenshots
 # Set programs that you use
 $terminal = alacritty
 $fileManager = dolphin
-$menu = rofi -show drun
+# $menu = rofi -show drun calc -modi calc -terse
+$menu = pgrep -x tofi-drun && pkill -x tofi-drun || tofi-drun --drun-launch=true > ~/.logs/tofi-drun.log 2>&1 &
+
+
 # wofi --show drun
 
 # Some default env vars.
@@ -53,7 +56,7 @@ input {
 general {
     # See https://wiki.hyprland.org/Configuring/Variables/ for more
 
-    gaps_in = 5
+    gaps_in = 3
     gaps_out = 0
     border_size = 0
     col.active_border = rgba(33ccffee) rgba(00ff99ee) 45deg
@@ -74,12 +77,8 @@ decoration {
         enabled = true
         size = 3
         passes = 1
+        xray = 0
     }
-
-    drop_shadow = yes
-    shadow_range = 4
-    shadow_render_power = 3
-    col.shadow = rgba(1a1a1aee)
 }
 
 animations {
@@ -105,26 +104,41 @@ dwindle {
 
 master {
     # See https://wiki.hyprland.org/Configuring/Master-Layout/ for more
-    new_is_master = true
+    # new_is_master = true
 }
 
 gestures {
     # See https://wiki.hyprland.org/Configuring/Variables/ for more
-    workspace_swipe = true
+    workspace_swipe = false
 }
 
+cursor {
+    no_warps = 1
+}
 misc {
     # See https://wiki.hyprland.org/Configuring/Variables/ for more
     force_default_wallpaper = 0 # Set to 0 or 1 to disable the anime mascot wallpapers
     disable_hyprland_logo = 1
+    focus_on_activate = 1
 }
 
+plugin {
+    virtual-desktops {
+        names = 1:Coding, 2:Internet, 3:3,4:4, 5:Social 
+        cycleworkspaces = 0
+        rememberlayout = none
+        notifyinit = 0
+        verbose_logging = 0
+    }
+}
+
+
 # Example per-device config
 # See https://wiki.hyprland.org/Configuring/Keywords/#per-device-input-configs for more
-device {
+# device {
-    name = epic-mouse-v1
+    # name = epic-mouse-v1
-    sensitivity = -0.5
+    # sensitivity = -0.5
-}
+# }
 
 # Example windowrule v1
 # windowrule = float, ^(kitty)$
@@ -164,51 +178,66 @@ bind = $mainMod, up, movefocus, u
 bind = $mainMod, down, movefocus, d
 
 # Switch workspaces with mainMod + [0-9]
-bind = $mainMod, 1, workspace, 1
+bind = $mainMod ALT, 1, workspace, 1
-bind = $mainMod, 2, workspace, 2
+bind = $mainMod ALT, 2, workspace, 2
-bind = $mainMod, 3, workspace, 3
+bind = $mainMod ALT, 3, workspace, 3
-bind = $mainMod, 4, workspace, 4
+bind = $mainMod ALT, 4, workspace, 4
-bind = $mainMod, 5, workspace, 5
+bind = $mainMod ALT, 5, workspace, 5
-bind = $mainMod, 6, workspace, 6
+bind = $mainMod ALT, 6, workspace, 6
-bind = $mainMod, 7, workspace, 7
+bind = $mainMod ALT, 7, workspace, 7
-bind = $mainMod, 8, workspace, 8
+bind = $mainMod ALT, 8, workspace, 8
-bind = $mainMod, 9, workspace, 9
+bind = $mainMod ALT, 9, workspace, 9
-bind = $mainMod, 0, workspace, 10
+bind = $mainMod ALT, 0, workspace, 10
+
+bind = $mainMod, 1, vdesk, 1
+bind = $mainMod, 2, vdesk, 2
+bind = $mainMod, 3, vdesk, 3
+bind = $mainMod, 4, vdesk, 4
+bind = $mainMod, 5, vdesk, 5
+bind = $mainMod, 6, vdesk, 6
+bind = $mainMod, 7, vdesk, 7
+bind = $mainMod, 8, vdesk, 8
+bind = $mainMod, 9, vdesk, 9
+bind = $mainMod, 0, vdesk, 10
 
 # Move active window to a workspace with mainMod + SHIFT + [0-9]
-bind = $mainMod SHIFT, 1, movetoworkspace, 1
+bind = $mainMod SHIFT, 1, movetodesk, 1
-bind = $mainMod SHIFT, 2, movetoworkspace, 2
+bind = $mainMod SHIFT, 2, movetodesk, 2
-bind = $mainMod SHIFT, 3, movetoworkspace, 3
+bind = $mainMod SHIFT, 3, movetodesk, 3
-bind = $mainMod SHIFT, 4, movetoworkspace, 4
+bind = $mainMod SHIFT, 4, movetodesk, 4
-bind = $mainMod SHIFT, 5, movetoworkspace, 5
+bind = $mainMod SHIFT, 5, movetodesk, 5
-bind = $mainMod SHIFT, 6, movetoworkspace, 6
+bind = $mainMod SHIFT, 6, movetodesk, 6
-bind = $mainMod SHIFT, 7, movetoworkspace, 7
+bind = $mainMod SHIFT, 7, movetodesk, 7
-bind = $mainMod SHIFT, 8, movetoworkspace, 8
+bind = $mainMod SHIFT, 8, movetodesk, 8
-bind = $mainMod SHIFT, 9, movetoworkspace, 9
+bind = $mainMod SHIFT, 9, movetodesk, 9
-bind = $mainMod SHIFT, 0, movetoworkspace, 10
+bind = $mainMod SHIFT, 0, movetodesk, 10
 
 # Example special workspace (scratchpad)
 bind = $mainMod, S, togglespecialworkspace, magic
 bind = $mainMod CTRL, S, movetoworkspace, special:magic
 
 
-
+bind = $mainMod SHIFT, S, exec, hyprshot -m region
-
-bind = $mainMod SHIFT, S, exec, /home/nathan/.local/bin/hyprshot -m region
 
 # Scroll through existing workspaces with mainMod + scroll
 # bind = $mainMod, mouse_down, workspace, e+1
 # bind = $mainMod, mouse_up, workspace, e-1
 
 # Scroll through existing workspaces with mainMod + TAB and SHIFT + TAB
-bind = $mainMod, TAB, workspace, e+1
+# bind = $mainMod, TAB, workspace, e+1
-bind = $mainMod SHIFT, TAB, workspace, e-1
+# bind = $mainMod SHIFT, TAB, workspace, e-1
-bind = ALT, TAB, workspace, e+1
+bind = $mainMod, TAB, overview:toggle
-bind = ALT SHIFT, TAB, workspace, e-1
+# bindr = SUPER, SUPER_L, exec, $menu
+
+
+bind = ALT, TAB, exec, ~/.config/hypr/scripts/search-windows.sh
+# bind = ALT SHIFT, TAB, workspace, e-1
+# bind = ALT, TAB, exec, hyprswitch gui --mod-key alt --key tab --close mod-key-release --reverse-key=key=shift && hyprswitch dispatch
+# bind = ALT SHIFT, TAB, exec, hyprswitch gui --mod-key alt --key tab --close mod-key-release --reverse-key=key=shift && hyprswitch dispatch -r
 
 # Media control keys
-bindle=, XF86AudioRaiseVolume, exec, vol --up
+bindle=, XF86AudioRaiseVolume, exec, wpctl set-volume -l 1.4 @DEFAULT_AUDIO_SINK@ 5%+
-bindle=, XF86AudioLowerVolume, exec, vol --downxe
+bindle=, XF86AudioLowerVolume, exec, wpctl set-volume -l 1.4 @DEFAULT_AUDIO_SINK@ 5%-
 bindle=, XF86MonBrightnessUp, exec, brightnessctl s +5%
 bindle=, XF86MonBrightnessDown, exec, brightnessctl s 5%-
 bindle=, XF86Search, exec, $menu
@@ -223,3 +252,7 @@ bindl=, XF86AudioPrev, exec, playerctl previous
 # Move/resize windows with mainMod + LMB/RMB and dragging
 bindm = $mainMod, mouse:272, movewindow
 bindm = $mainMod, mouse:273, resizewindow
+
+# Mouse wheel tilt
+bind = , mouse_left, exec, ydotool key 56:1 105:1 105:0 56:0
+bind = , mouse_right, exec, ydotool key 56:1 106:1 106:0 56:0

.config/hypr/hyprlock.conf

@@ -9,7 +9,8 @@ general {
 # BACKGROUND
 background {
 #   monitor = 
-  path = $HOME/.config/hypr/hyprlock.png
+  path = $HOME/.config/backgrounds/background.png
+  # path = $HOME/.config/hypr/fireplace.mp4
   blur_passes = 1
 #   color = $base
 }

.config/hypr/hyprswitch.css

@@ -0,0 +1,71 @@
+.monitor {
+    font-size: 20px;
+}
+
+.monitor:hover {
+    background-color: var(--bg-color-hover);
+}
+
+.monitor_active {
+    border: var(--border-size) solid var(--border-color-active);
+}
+
+
+.index {
+    display: none;
+    margin: 3px;
+    padding: 2px 4px;
+    font-size: 22px;
+    font-weight: bold;
+    font-family: monospace;
+    border-radius: var(--border-radius);
+    background-color: var(--bg-color);
+    border: var(--border-size) solid var(--index-border-color);
+}
+
+
+.workspace {
+    font-size: 24px;
+    font-weight: bold;
+
+    border-radius: var(--border-radius);
+    background-color: var(--bg-color);
+    border: var(--border-size) solid var(--border-color);
+    color: #ffffff;
+}
+
+.workspace:hover {
+    background-color: var(--bg-color-hover);
+}
+
+.workspace_special {
+    border: var(--border-size) solid rgba(0, 255, 0, 0.4);
+}
+
+.workspace_active {
+    border: var(--border-size) solid var(--border-color-active);
+}
+
+
+.client-image {
+    display: none;
+    margin-top: 10px;
+    margin-bottom: 5px;
+}
+
+.client {
+    font-size: 16px;
+    font-weight: normal;
+    color: #ffffff;
+    border-radius: var(--border-radius);
+    background-color: var(--bg-color);
+    border: var(--border-size) solid var(--border-color);
+}
+
+.client:hover {
+    background-color: var(--bg-color-hover);
+}
+
+.client_active {
+    border: var(--border-size) solid var(--border-color-active);
+}

.config/hypr/scripts/.gitignore

@@ -0,0 +1 @@
+.venv

.config/hypr/scripts/desk.py

@@ -0,0 +1,135 @@
+#!/usr/bin/python3
+import argparse
+import os
+import sys
+import subprocess
+import json
+
+# Check if first arg is colour
+waybar = {}
+waybar["SELECTED"] = '<span underline="low">'
+waybar["DEFAULT"] = '<span foreground="#ffffff">'
+waybar["WHITE"]='<span foreground="#ffffff">'
+waybar["RED"]='<span foreground="#ff0000">'
+waybar["GREEN"]='<span foreground="#60d090">'
+waybar["YELLOW"]='<span foreground="#ffff00">'
+waybar["BLUE"]='<span foreground="#0000ff">'
+waybar["NC"]='</span>'
+
+shell = {}
+shell["SELECTED"]='\033[0;32m'
+shell["WHITE"]='\033[0;37m'
+shell["RED"]='\033[0;31m'
+shell["GREEN"]='\033[0;32m'
+shell["YELLOW"]='\033[0;33m'
+shell["BLUE"]='\033[0;34m'
+shell["NC"]='\033[0m'
+
+
+
+def get_info():
+    state = subprocess.run(["hyprctl", "printstate"], capture_output=True, text=True)
+    state = state.stdout.splitlines()
+    state.pop(0)  # Remove the first line
+    info = {}
+    while True:
+        if len(state) == 0:
+            break
+
+        line = state.pop(0)
+        if line == "":
+            continue
+        if "-" not in line:
+            break
+        key, value = line.split(": ")
+        key = key.strip().removeprefix("-").strip()
+        value = value.strip() 
+        desk_id = value
+        info[desk_id] = {"name": key}
+        for i in range(4):
+            line = state.pop(0)
+            if line == "":
+                break
+            line = line.split(": ")
+            if len(line) == 2:
+                key, value = line
+                key = key.strip()
+                value = value.strip()
+                info[desk_id][key] = value
+    return info
+
+def get_icon(desk_name, focused=False):
+    # Get the icon for the desk
+    icon = ""
+    desk_name = desk_name.strip().lower()
+    if desk_name == "coding":
+        return ""
+    if desk_name == "web" or desk_name == "internet":
+        return "󰖟"
+    if desk_name == "social":
+        return "󰭻"
+
+
+    return "" if focused else ""
+
+if __name__ == "__main__":
+    # Check for arguments
+    parser = argparse.ArgumentParser(description="hyprland desk script")    
+    parser.add_argument("-d", "--desk", type=int, help="Desk number to switch to")
+    parser.add_argument("-w", "--waybar", action="store_true", help="Waybar mode")
+    parser.add_argument("-i", "--info", action="store_true", help="Info mode")
+    parser.add_argument("-v", "--verbose", action="store_true", help="Verbose mode")
+    args = parser.parse_args()
+
+    if args.waybar or args.info:
+        colours = waybar if args.waybar else shell
+        # Get info from hyprctl printstate
+        info = get_info()
+        output = ""
+        if args.desk:
+            desk_num = args.desk
+            if str(desk_num) not in info:
+                print(f"Desk {desk_num} does not exist")
+                sys.exit(1)
+            desk = info[str(desk_num)]
+            if args.verbose:
+                print(desk)
+            if desk["Populated"] == "false" and desk["Focused"] == "false":
+                print(f"Desk {desk_num} is empty")
+                sys.exit(1)
+
+            if desk["Focused"] == "true":
+                output += f"{colours['SELECTED']} {desk_num}: {get_icon(desk['name'],True)} {colours['NC']} "
+            else:
+                output += f"{colours["DEFAULT"]} {desk_num}: {get_icon(desk['name'])} {colours['NC']} "
+            print(output)
+            sys.exit(0)
+
+
+        for i in range(1, int(max(info.keys()))+1):
+            if str(i) not in info:
+                continue
+            desk = info[str(i)]
+            if desk["Populated"] == "false" and desk["Focused"] == "false":
+                continue
+            if args.verbose:
+                print(desk)
+
+            if desk["Focused"] == "true":
+                output += f"{colours['SELECTED']} {get_icon(desk['name'],True)} {colours['NC']} "
+            else:
+                output += f"{colours["DEFAULT"]} {get_icon(desk['name'])} {colours['NC']} "
+
+
+        print(output)
+        sys.exit(0)
+    if args.desk:
+        # Switch to desk
+        if args.verbose:
+            print(f"Switching to desk {args.desk}")
+        
+        subprocess.run(["hyprctl", "dispatch", "vdesk", str(args.desk)])
+        sys.exit(0)
+            
+            
+        

.config/hypr/scripts/get-volume.sh

@@ -0,0 +1,9 @@
+#!/bin/bash
+# Check if muted
+if wpctl get-volume @DEFAULT_AUDIO_SINK@ | grep -q "[MUTED]"; then
+    # If muted, show notification
+    echo "󰝟"
+    exit 0
+fi
+
+echo "$(wpctl get-volume @DEFAULT_AUDIO_SINK@ | awk '{print $2 * 100}' | sed 's/\.0*$//g')% 󰕾"

.config/hypr/scripts/search-windows.sh

@@ -0,0 +1,44 @@
+#!/bin/sh
+
+# Check if tofi is running
+if pgrep -x "tofi" > /dev/null; then
+    # Passing as regular tab
+    ydotool key 15:1 15:0
+    exit
+fi
+
+
+# Get a list of open windows
+WINDOWS=$(hyprctl clients | grep "title: " | sed 's/.*title: //')
+
+# If there are no open windows, exit
+[ -z "$WINDOWS" ] && exit
+
+# Use tofi to select a window
+SELECTED=$(echo "$WINDOWS" | tofi --num-results 10 --padding-left 20% --padding-top 20% --prompt-text "Select a window: ")
+
+# If a window was selected, focus it
+if [ -n "$SELECTED" ]; then
+    echo "Focusing window: $SELECTED"
+    # Check if the selected window is on special workspace
+    # hyprctl clients | grep "$SELECTED" -A 10 | grep workspace
+    # returns like workspace: -98 (special:magic)
+    workspace=$(hyprctl clients | grep "$SELECTED" -A 10 | grep workspace)
+    # if workspace is special, try to focus it
+    if [[ $workspace == *"special:"* ]]; then
+        # Get the workspace name (after the colon)
+        workspace_name=$(echo "$workspace" | sed -E 's/.*:\s*([^)]*).*/\1/')
+        # Remove number and prefix
+        
+        echo "Focusing special workspace: $workspace_name"
+        # Focus the workspace
+        hyprctl dispatch togglespecialworkspace "$workspace_name"
+    fi
+    # Get the window ID
+    window_id=$(hyprctl clients | grep "$SELECTED" -A 10 | grep pid)
+    # Get the window ID (after the colon)
+    window_id=$(echo "$window_id" | sed -E 's/.*:\s*([^)]*).*/\1/')
+    echo "Window ID: $window_id"
+
+    hyprctl dispatch focuswindow pid:"$window_id"
+fi

.config/hypr/scripts/volume.sh

@@ -0,0 +1,10 @@
+#!/bin/bash
+hyprctl dismissnotify
+# Check if muted
+if wpctl get-volume @DEFAULT_AUDIO_SINK@ | grep -q "[MUTED]"; then
+    # If muted, show notification
+    hyprctl notify -1 5000 0 "Volume muted"
+    exit 0
+fi
+
+hyprctl notify -1 5000 0 "Volume $(wpctl get-volume @DEFAULT_AUDIO_SINK@ | awk '{print $2 * 100}' | sed 's/\.0*$//g')%"

.config/hypr/start-exec.conf

@@ -1,23 +1,33 @@
-exec-once = /usr/lib/x86_64-linux-gnu/libexec/polkit-kde-authentication-agent-1
+exec-once = hyprpm reload -n
-exec-once = systemctl --user start plasma-kwallet-pam.service plasma-polkit-agent.service
+exec-once = systemctl --user start hyprpolkitagent
-exec-once = /usr/bin/kwalletd6
+exec-once = /usr/bin/kdeconnectd &
-exec-once = systemctl --user start xdg-desktop-portal-hyprland
+exec-once = /usr/bin/swaync &
-exec-once = /usr/lib/x86_64-linux-gnu/libexec/kdeconnectd
-exec-once = swaync
 
 # Start apps in .autostart
-exec-once = /home/$USER/.config/autostart/com.impervious.fingertip.desktop
+exec-once = /home/nathan/AppImages/Fingertip-0.0.4-beta2-linux-X64.AppImage & 
-exec-once = /home/$USER/.config/autostart/Nextcloud.desktop
+exec-once = /home/nathan/AppImages/nextcloud_desktop_sync_client.appimage --background & 
-exec-once = /usr/bin/python3 /usr/bin/solaar --window=hide
+# exec-once = /usr/bin/solaar -w hide &
 
 
 # Start windows
 exec-once = alacritty --class alacritty-init
 # exec-once = brave-browser # TODO after adding start workspace
-exec-once = discord-ptb
+exec-once = discord --start-minimized
-exec-once = slack
+exec-once = slack -U
 
 
 exec-once = waybar
 exec-once = hyprpaper
-exec-once = clipse -listen & clipse --listen
+exec-once = hypridle
+exec-once = clipse -listen
+# exec-once = hyprswitch init --show-title --custom-css ~/.config/hypr/hyprswitch.css &
+
+
+# Proxy
+# exec-once = gsettings set org.gnome.system.proxy mode 'auto' && gsettings set org.gnome.system.proxy autoconfig-url 'http://127.0.0.1:9590/proxy.pac'
+# exec-once = kwriteconfig6 --file kioslaverc --group 'Proxy Settings' --key 'ProxyType' 2 && kwriteconfig6 --file kioslaverc --group 'Proxy Settings' --key 'AutoProxyURL' "http://127.0.0.1:9590/proxy.pac"
+# exec-once = export PROXY_PAC_URL="http://127.0.0.1:9590/proxy.pac"
+# exec-once = export http_proxy="http://127.0.0.1:9590"
+# exec-once = export https_proxy="$http_proxy"
+# exec-once = export no_proxy="localhost,127.0.0.1,::1"
+

.config/hypr/windowrules.conf

@@ -1,38 +1,20 @@
-windowrulev2 = float,class:(clipse)
+# windowrulev2 = float,class:(clipse)
-windowrulev2 = size 622 652,class:(clipse)
+# windowrulev2 = size 622 652,class:(clipse)
-windowrulev2 = stayfocused,class:(clipse)
+# windowrulev2 = stayfocused,class:(clipse)
 
+windowrulev2 = float,class:(float)
+windowrulev2 = float,class:(swayimg)
+windowrulev2 = size 80%,class:(swayimg)
+windowrule = noblur 1 noanim 1 noshadow 1, class:(^$)
+# windowrule = opacity 0.2, class:(^$)
 
-windowrule = float, polkit-kde-authentication-agent-1
+# # Start windows
-windowrule = center,polkit-kde-authentication-agent-1
+# windowrulev2 = workspace 1, class:alacritty-init
-windowrule = size 800 500,polkit-kde-authentication-agent-1
+# # windowrulev2 = workspace 3, class:Brave-browser
-windowrule = stayfocused,polkit-kde-authentication-agent-1
+# windowrulev2 = workspace 5, class:discord
-
+# windowrulev2 = workspace 5, class:org.telegram.desktop
-
+# windowrulev2 = workspace 5, class:Slack
-windowrule = float, io.github.kaii_lb.Overskride
-windowrule = center,io.github.kaii_lb.Overskride
-windowrule = size 1000 800,io.github.kaii_lb.Overskride
-windowrule = float, overskride
-windowrule = center,overskride
-windowrule = size 700 500,overskride
-
-
-windowrule = float, iwgtk
-windowrule = center,iwgtk
-windowrule = size 800 500,iwgtk
-
-windowrule = float, org.kde.gwenview
-windowrule = center,org.kde.gwenview
-windowrule = size 800 500,org.kde.gwenview
-
-windowrule = float, kdesystemsettings
-windowrule = center,kdesystemsettings
-windowrule = size 1500 1000,kdesystemsettings
-
-
-# Start windows
-windowrulev2 = workspace 1, class:alacritty-init
-# windowrulev2 = workspace 3, class:Brave-browser
-windowrulev2 = workspace 5, class:discord
-windowrulev2 = workspace 5, class:Slack
 
+stickyrule = class:discord,5
+stickyrule = class:org.telegram.desktop,5
+stickyrule = class:Slack,5

.zshrc

@@ -158,7 +158,8 @@ alias message='/home/$USER/scripts/message.sh'
 alias dockerstart='/home/$USER/scripts/dockerstart.sh'
 alias dockerstop='/home/$USER/scripts/dockerstop.sh'
 alias domains='/home/$USER/scripts/domains.py'
-
+alias fix_touchpad='/home/$USER/scripts/fix_touchpad.sh'
+alias open=xdg-open
 
 # Use gitkraken's cli tool
 unalias gk